Schedule Viewer
Last schedule upload: D3-R25005-00-RPL10 — 8463 activities — 05/05/2026 09:13 AM CT
RPL10 - GC LIVE SCHEDULE - Data Date 20260426.xer
· Uploaded May 05, 2026 02:13 PM
· 8463 activities
Experimental
Auto-populate checklist dates from schedule:
100
Activities Shown
0
Completed
0
In Progress
2
Critical
| Activity ID | Activity Name | WBS | Status | Start | Finish | Dur (d) | Rem (d) | % Comp | Float (d) |
|---|---|---|---|---|---|---|---|---|---|
RPL10.WP4.04680 |
RPL10.Conn NS2.CFD1.48<>41-44 Pull Duplex Jumper (LC<>LC) [RSW<>FSW] | Pull Duplex Jumper [RSW<>FSW] | Not Started | 09/29/26 | 09/30/26 | 2.5 | 2.5 |
|
91.2 |
RPL10.WP4.08440 |
RPL10.Conn NS1.CFD6 Pull/Install Ext. Trunk (192F) [EB<>DR] | [EB<>DR] | Not Started | 09/29/26 | 09/30/26 | 2.5 | 2.5 |
|
60.0 |
RPL10.Conn.MS.02150 |
FacNet Ready @ NS2 IDFs | Connectivity Milestones | Not Started | 09/30/26 | 09/30/26 | 0.0 | 0.0 |
|
766.2 |
RPL10.INT.NS2.01970 |
RPL10.Interior.NS2 - Final Punch Walk | Tie-Ins | Not Started | 09/30/26 | 10/01/26 | 2.5 | 2.5 |
|
101.2 |
RPL10.INT.NS3.01220 |
RPL10.Interior.NS3 - Control Fault Domain 1 SQ7.2 - Install Mechanical Side Aisle Cable Tray | Remaining Tie-ins post Mech Side Aisle install | Not Started | 09/30/26 | 10/27/26 | 25.0 | 25.0 |
|
0.0 |
RPL10.INT.NS3.02640 |
RPL10.Interior.NS3 - OFE - Control Fault Domain 3 SQ9.2 (HAC) | OFE NS3 Control Fault Domain 3 | Not Started | 09/30/26 | 10/13/26 | 12.5 | 12.5 |
|
17.5 |
RPL10.INT.NS4.01450 |
RPL10.Interior.NS4 - Control Fault Domain 3 SQ9.1 - Pull BMS from panel to devices | Remaining Tie-ins post Mech Side Aisle install | Not Started | 09/30/26 | 10/27/26 | 25.0 | 25.0 |
|
63.8 |
RPL10.INT.NS4.01460 |
RPL10.Interior.NS4 - Control Fault Domain 3 SQ9.1 - Pull EPMS from panel to devices | Remaining Tie-ins post Mech Side Aisle install | Not Started | 09/30/26 | 10/27/26 | 25.0 | 25.0 |
|
63.8 |
RPL10.INT.NS4.01470 |
RPL10.Interior.NS4 - Control Fault Domain 3 SQ9.1 - Set UPS and Panel (2) and GS.IDF N42 | Remaining Tie-ins post Mech Side Aisle install | Not Started | 09/30/26 | 10/27/26 | 25.0 | 25.0 |
|
48.8 |
RPL10.OFCI.7240 |
OFCI - Delivery ROJ: FE Fiber for CFD NS3.4 (ROJ ) (RVCD ) | NS3 | Not Started | 09/30/26 | 10/20/26 | 18.8 | 18.8 |
|
68.8 |
RPL10.SSBC.BB.1650 |
RPL10.Ext.Build Back.SSB-Corr - LO #1 - Tape Finish Paint | Build Back Exterior Leave Out Wall #1 (Tent Area) | Not Started | 09/30/26 | 10/06/26 | 6.2 | 6.2 |
|
46.2 |
RPL10.W3B.FE.012231 |
RPL10.Conn EF1F<>NS2.CFD3 (P2-3) Install Fiber Trunk (288F) [EF<>JXSW] | EF1F<>NS2.4 (P2-3) [EF<>JXSW] | Not Started | 09/30/26 | 10/02/26 | 3.8 | 3.8 |
|
28.8 |
RPL10.W3B.FE.012806 |
RPL10.Conn EF1B<>NS2.CFD3 (P2-3) Test Fiber Trunk (384F) [EF<>SSW] | EF1B<>NS2.4 (P2-3) [EF<>SSW] | Not Started | 09/30/26 | 10/01/26 | 2.5 | 2.5 |
|
35.0 |
RPL10.WP4.016700 |
RPL10.Conn NS1.CFD4.24 Install (A-End/Passive) Duplex Jumper (LC<>LC) [MA<>JXSW] | Install (A-End/Passive) Duplex Jumper [MA<>JXSW] | Not Started | 09/30/26 | 10/01/26 | 2.5 | 2.5 |
|
83.8 |
RPL10.WP4.016860 |
RPL10.Conn NS1.CFD4.48<>36-40 Install (A-End/Passive) Duplex Jumper (LC<>LC) [RSW<>FSW] | Install (A-End/Passive) Duplex Jumper [RSW<>FSW] | Not Started | 09/30/26 | 10/01/26 | 2.5 | 2.5 |
|
78.8 |
RPL10.WP4.032940 |
RPL10.Conn NS2.CFD4.23 Install (Z-End/Active) Duplex Jumper (LC<>LC) [MA<>JXSW] | Install Duplex Jumper [MA<>JXSW] | Not Started | 09/30/26 | 10/01/26 | 2.5 | 2.5 |
|
92.5 |
RPL10.WP4.033020 |
RPL10.Conn NS2.CFD3.27 Install (Z-End/Active) Duplex Jumper (LC<>LC) [MA<>JXSW] | Install Duplex Jumper [MA<>JXSW] | Not Started | 09/30/26 | 10/01/26 | 2.5 | 2.5 |
|
82.5 |
RPL10.WP4.04700 |
RPL10.Conn NS2.CFD1.48<>46-49 Pull Duplex Jumper (LC<>LC) [RSW<>FSW] | Pull Duplex Jumper [RSW<>FSW] | Not Started | 09/30/26 | 09/30/26 | 1.2 | 1.2 |
|
93.8 |
GCD.RPL10.4225 |
[RPL10] TC Ready: Production Cabling Pathways Complete [NS4 Rows 1-8] | TC Ready: Production Cabling - NS4 | Not Started | 10/01/26 | 10/01/26 | 0.0 | 0.0 |
|
47.5 |
RPL10.CX.NS2.01160 |
RPL10.CX.NS2 - L3/L4 - Elec. Domain 04/03 | NS2 ELECTRICAL | Not Started | 10/01/26 | 10/06/26 | 5.0 | 5.0 |
|
-18.8 |
RPL10.EY.NS1.01470 |
RPL10.EY.NS1 - Remaining L2 Checklist Completion | Build Back Exterior Leave Out Wall #1 (Tent Area) | Not Started | 10/01/26 | 10/07/26 | 6.2 | 6.2 |
|
36.2 |
RPL10.INT.SSBC.01520 |
RPL10.Int.Build Back.SSB-Corr - LO #5 - Remaining Mechanical NS- 2 OFE TIe Ins | Build Back Interior Leave Out Wall #5 (NS2) | Not Started | 10/01/26 | 10/05/26 | 3.8 | 3.8 |
|
62.5 |
RPL10.INT.SSBC.01540 |
RPL10.Int.Build Back.SSB-Corr - LO #5 - Remaining Electrical NS- 2 OFE TIe Ins | Build Back Interior Leave Out Wall #5 (NS2) | Not Started | 10/01/26 | 10/07/26 | 6.2 | 6.2 |
|
60.0 |
RPL10.W3B.FE.011436 |
RPL10.Conn EF1F<>NS2.CFD2 (P2-3) Pull Fiber Trunk (288F) [EF<>JXSW] | EF1F<>NS2.5 (P2-3) [EF<>JXSW] | Not Started | 10/01/26 | 10/07/26 | 6.2 | 6.2 |
|
46.2 |
RPL10.W3B.FE.011736 |
RPL10.Conn EF2F<>NS2.CFD1 (P1-4) Pull Fiber Trunk (384F) [EF<>SSW] | EF2F<>NS2.6 (P1-4) [EF<>SSW] | Not Started | 10/01/26 | 10/02/26 | 2.5 | 2.5 |
|
58.8 |
RPL10.WP2.GSIDF.1120 |
RPL10.Conn GSIDFN21 Install & Test Network (FIM) | Network | Not Started | 10/01/26 | 10/05/26 | 3.8 | 3.8 |
|
108.8 |
RPL10.WP2.GSIDF.3040 |
RPL10.Conn GSIDFN21 Install Copper, WAPs, Security Camera & Access Control | Cabling | Not Started | 10/01/26 | 10/16/26 | 15.0 | 15.0 |
|
356.2 |
RPL10.WP3A.EF1B.1105 |
RPL10.Conn EF1B(OPE)<>EF2F(MBOX) Pull/Install/Test OSP Cabling (for RPL07) - P2 | EF1B<>EF2F | Not Started | 10/01/26 | 10/14/26 | 12.5 | 12.5 |
|
133.8 |
RPL10.WP3A.EF2B.1055 |
RPL10.Conn EF2B(LIU)<>EF1B(MBOX) Pull/Install/Test OSP Cabling (for RPL05) - P4 | EF2B<>EF1B | Not Started | 10/01/26 | 10/12/26 | 10.0 | 10.0 |
|
121.2 |
RPL10.WP3A.EF2B.1100 |
RPL10.Conn EF2B(OPE)<>EF1F(MBOX) Pull/Install/Test OSP Cabling (for RPL09) - P1 | EF2B<>EF2F | Not Started | 10/01/26 | 10/08/26 | 7.5 | 7.5 |
|
141.2 |
RPL10.WP3A.EF2B.1150 |
RPL10.Conn EF2B(OPE)<>EF2B(MBOX) Pull/Install/Test OSP Cabling (for RPL09) - P3 | EF2B<>EF2B | Not Started | 10/01/26 | 10/06/26 | 5.0 | 5.0 |
|
161.2 |
RPL10.WP3B.FE.09060 |
RPL10.Conn EF1F<>NS2.CFD2 (P2-3) Pull/Install/Test - WBS Summary | EF1F<>NS2.5 (P2-3) [EF<>JXSW] | Not Started | 10/01/26 | 11/03/26 | 30.0 | 30.0 |
|
28.8 |
RPL10.WP3B.FE.09300 |
RPL10.Conn EF2F<>NS2.CFD1 (P1-4) Pull/Install/Test - WBS Summary | EF2F<>NS2.6 (P1-4) [EF<>SSW] | Not Started | 10/01/26 | 11/12/26 | 37.5 | 37.5 |
|
28.8 |
RPL10.WP4.011740 |
RPL10.Conn NS2.CFD6 Pull/Install In-Row Trunk (24F) [MA<>EB] | [MA<>EB] | Not Started | 10/01/26 | 10/07/26 | 6.2 | 6.2 |
|
52.5 |
RPL10.WP4.018560 |
RPL10.Conn NS2.CFD4.24 Install (A-End/Passive) Duplex Jumper (LC<>LC) [MA<>JXSW] | Install (A-End/Passive) Duplex Jumper [MA<>JXSW] | Not Started | 10/01/26 | 10/02/26 | 2.5 | 2.5 |
|
93.8 |
RPL10.WP4.018720 |
RPL10.Conn NS2.CFD4.48<>36-40 Install (A-End/Passive) Duplex Jumper (LC<>LC) [RSW<>FSW] | Install (A-End/Passive) Duplex Jumper [RSW<>FSW] | Not Started | 10/01/26 | 10/02/26 | 2.5 | 2.5 |
|
88.8 |
RPL10.WP4.029800 |
RPL10.Conn NS4.CFD1.48<>46-49 Prefab Duplex Jumper (LC<>LC) [RSW<>FSW] | Prefab | Not Started | 10/01/26 | 10/01/26 | 1.2 | 1.2 |
|
168.8 |
RPL10.WP4.029960 |
RPL10.Conn NS4.CFD2.48<>36-40 Prefab Duplex Jumper (LC<>LC) [RSW<>FSW] | Prefab | Not Started | 10/01/26 | 10/05/26 | 3.8 | 3.8 |
|
162.5 |
RPL10.WP4.030260 |
RPL10.Conn NS4.CFD4.48<>11-15 Prefab Duplex Jumper (LC<>LC) [RSW<>FSW] | Prefab | Not Started | 10/01/26 | 10/07/26 | 6.2 | 6.2 |
|
137.5 |
RPL10.WP4.031160 |
RPL10.Conn NS3.CFD2.48<>36-40 Prefab Duplex Jumper (LC<>LC) [RSW<>FSW] | Prefab | Not Started | 10/01/26 | 10/05/26 | 3.8 | 3.8 |
|
175.0 |
RPL10.WP4.08700 |
RPL10.Conn NS1.CFD6 Pull/Install Ext. Trunk (24F) [EB<>DR] | [EB<>DR] | Not Started | 10/01/26 | 10/05/26 | 3.8 | 3.8 |
|
60.0 |
RPL10.WP4.09240 |
RPL10.Conn NS2.CFD4 Pull/Install/Test Trunk (192F) [MA<>JXSW] | Pull/Install Trunk & Multidrop Cable | Not Started | 10/01/26 | 10/14/26 | 12.5 | 12.5 |
|
83.8 |
RPL10.WP4.NS1.01560 |
RPL10.Conn NS1.CFD4 Network Suite Management and Console In - Rack Fanout - PON | Post ORv3 Rack | Not Started | 10/01/26 | 10/12/26 | 10.0 | 10.0 |
|
35.0 |
RPL10.WP4.NS1.04180 |
RPL10.Conn NS1.CFD3 Network Suite [JXSW<>MA] Fanouts | Post ORv3 Rack | Not Started | 10/01/26 | 10/12/26 | 10.0 | 10.0 |
|
30.0 |
RPL10.EY.NS1.01480 |
RPL10.EY.NS1 - Install Landscaping | Hardscape and Landscape | Not Started | 10/02/26 | 10/15/26 | 12.5 | 12.5 |
|
357.5 |
RPL10.INT.NS3.01200 |
RPL10.Conn NS3.CFD1 - Set Passive Racks for WP3B | Infrastructure | Not Started | 10/02/26 | 10/06/26 | 3.8 | 3.8 |
|
43.8 |
RPL10.INT.NS3.02980 |
RPL10.Conn NS3.CFD1 - Set Passive Racks for PON | Infrastructure | Not Started | 10/02/26 | 10/06/26 | 3.8 | 3.8 |
|
160.0 |
RPL10.INT.NS4.01590 |
RPL10.Interior.NS4 - Control Fault Domain 4 SQ10.1 - Pull BMS from panel to devices | Remaining Tie-ins post Mech Side Aisle install | Not Started | 10/02/26 | 10/29/26 | 25.0 | 25.0 |
|
85.0 |
RPL10.INT.NS4.01600 |
RPL10.Interior.NS4 - Control Fault Domain 4 SQ10.1 - Pull EPMS from panel to devices | Remaining Tie-ins post Mech Side Aisle install | Not Started | 10/02/26 | 10/29/26 | 25.0 | 25.0 |
|
85.0 |
RPL10.INT.NS4.01610 |
RPL10.Interior.NS4 - Control Fault Domain 4 SQ10.1 - Set UPS and Panel (2) | Remaining Tie-ins post Mech Side Aisle install | Not Started | 10/02/26 | 10/29/26 | 25.0 | 25.0 |
|
68.8 |
RPL10.W3B.FE.012376 |
RPL10.Conn EF1F<>NS1.CFD3 (P2-3) Install Fiber Trunk (384F) [EF<>SSW] | EF1F<>NS1.4 (P2-3) [EF<>SSW] | Not Started | 10/02/26 | 10/05/26 | 2.5 | 2.5 |
|
18.8 |
RPL10.W3B.FE.013011 |
RPL10.Conn EF1F<>NS1.CFD3 (P2-3) Test Fiber Trunk (288F) [EF<>JXSW] | EF1F<>NS1.4 (P2-3) [EF<>JXSW] | Not Started | 10/02/26 | 10/05/26 | 2.5 | 2.5 |
|
23.8 |
RPL10.WP3A.EF2B.1035 |
RPL10.Conn EF2B(OPE)<>EF1F(MBOX) Pull/Install/Test OSP Cabling (for RPL09) - P4 | EF2B<>EF1F | Not Started | 10/02/26 | 10/15/26 | 12.5 | 12.5 |
|
157.5 |
RPL10.WP4.016880 |
RPL10.Conn NS1.CFD4.48<>41-44 Install (A-End/Passive) Duplex Jumper (LC<>LC) [RSW<>FSW] | Install (A-End/Passive) Duplex Jumper [RSW<>FSW] | Not Started | 10/02/26 | 10/05/26 | 2.5 | 2.5 |
|
78.8 |
RPL10.WP4.031220 |
RPL10.Conn NS3.CFD3.48<>03-05 Prefab Duplex Jumper (LC<>LC) [RSW<>FSW] | Prefab | Not Started | 10/02/26 | 10/05/26 | 2.5 | 2.5 |
|
142.5 |
RPL10.WP4.032960 |
RPL10.Conn NS2.CFD4.24 Install (Z-End/Active) Duplex Jumper (LC<>LC) [MA<>JXSW] | Install Duplex Jumper [MA<>JXSW] | Not Started | 10/02/26 | 10/05/26 | 2.5 | 2.5 |
|
92.5 |
RPL10.WP4.033040 |
RPL10.Conn NS2.CFD3.28 Install (Z-End/Active) Duplex Jumper (LC<>LC) [MA<>JXSW] | Install Duplex Jumper [MA<>JXSW] | Not Started | 10/02/26 | 10/05/26 | 2.5 | 2.5 |
|
82.5 |
RPL10.WP4.06560 |
RPL10.Conn NS4.CFD1.48<>46-49 Pull Duplex Jumper (LC<>LC) [RSW<>FSW] | Pull Duplex Jumper [RSW<>FSW] | Not Started | 10/02/26 | 10/06/26 | 3.8 | 3.8 |
|
168.8 |
RPL10.WP4.06580 |
RPL10.Conn NS4.CFD1.48<>06-10 Pull Duplex Jumper (LC<>LC) [RSW<>FSW] | Pull Duplex Jumper [RSW<>FSW] | Not Started | 10/02/26 | 10/07/26 | 5.0 | 5.0 |
|
170.0 |
RPL10.WP4.06600 |
RPL10.Conn NS4.CFD1.48<>11-15 Pull Duplex Jumper (LC<>LC) [RSW<>FSW] | Pull Duplex Jumper [RSW<>FSW] | Not Started | 10/02/26 | 10/09/26 | 7.5 | 7.5 |
|
170.0 |
RPL10.WP4.NS3.01920 |
RPL10.Conn NS3.CFD3 Network - WBS Summary | Network | Not Started | 10/02/26 | 02/18/27 | 116.2 | 116.2 |
|
93.8 |
RPL10.WP4.NS4.02060 |
RPL10.Conn NS4.CFD1 Infrastructure - WBS Summary | Infrastructure | Not Started | 10/02/26 | 10/07/26 | 5.0 | 5.0 |
|
72.5 |
RPL10.WP4.NS4.02080 |
RPL10.Conn NS4.CFD1 Infrastructure | Infrastructure | Not Started | 10/02/26 | 10/07/26 | 5.0 | 5.0 |
|
72.5 |
RPL10.WP4.NS4.02100 |
RPL10.Conn NS4.CFD1 Infrastructure - WBS Summary | Infrastructure | Not Started | 10/02/26 | 10/07/26 | 5.0 | 5.0 |
|
65.0 |
RPL10.WP4.NS4.02120 |
RPL10.Conn NS4.CFD2 Infrastructure | Infrastructure | Not Started | 10/02/26 | 10/07/26 | 5.0 | 5.0 |
|
65.0 |
GCD.RPL10.6245 |
L5 IST Area Completion EF1 - RPL10 | EF1 | Not Started | 10/05/26 | 10/05/26 | 0.0 | 0.0 |
|
367.5 |
ICM.B10.2510.3 |
[NWB} L3/4 Start - NWS3 | Commissioning | Not Started | 10/05/26 | 10/05/26 | 0.0 | 0.0 |
|
192.5 |
RPL10.CX.NS3.01030 |
RPL10.CX.NS3 - L3/L4 - House Power (for electrical) | NS3 HOUSE POWER | Not Started | 10/05/26 | 10/16/26 | 12.5 | 12.5 |
|
61.2 |
RPL10.CX.NS4.01030 |
RPL10.CX.NS4 - L3/L4 - MV Skids (7) Loop 4 | NS4 ELECTRICAL | Not Started | 10/05/26 | 10/13/26 | 8.8 | 8.8 |
|
107.5 |
RPL10.Conn.MS.01070 |
CorpNet & FacNet Available - NS2 | Network Suite 2 | Not Started | 10/05/26 | 10/05/26 | 0.0 | 0.0 |
|
108.8 |
RPL10.INT.NS3.01360 |
RPL10.Interior.NS3 - Control Fault Domain 2 SQ8.2 - Install Mechanical Side Aisle Cable Tray | Remaining Tie-ins post Mech Side Aisle install | Not Started | 10/05/26 | 10/30/26 | 25.0 | 25.0 |
|
3.8 |
RPL10.INT.NS3.01420 |
RPL10.Interior.NS3 - Control Fault Domain 3 SQ9.2 - Install Vesda / FA | Remaining Tie-ins post Mech Side Aisle install | Not Started | 10/05/26 | 10/30/26 | 25.0 | 25.0 |
|
66.2 |
RPL10.INT.NS3.01430 |
RPL10.Interior.NS3 - Control Fault Domain 3 SQ9.2 - Install FW | Remaining Tie-ins post Mech Side Aisle install | Not Started | 10/05/26 | 10/30/26 | 25.0 | 25.0 |
|
17.5 |
RPL10.INT.NS3.02030 |
RPL10.Interior.NS3 - Control Fault Domain 3 SQ9.2 - Install TW | Remaining Tie-ins post Mech Side Aisle install | Not Started | 10/05/26 | 10/30/26 | 25.0 | 25.0 |
|
17.5 |
RPL10.INT.NS3.02660 |
RPL10.Interior.NS3 - OFE - Control Fault Domain 3 SQ9.2 (Mech Side Aisle) | OFE NS3 Control Fault Domain 3 | Not Started | 10/05/26 | 10/14/26 | 10.0 | 10.0 |
|
17.5 |
RPL10.INT.NS3.02900 |
RPL10.Interior.NS3 - Control Fault Domain 3 SQ9.2 - Install Duct (MES Side) | Remaining Tie-ins post Mech Side Aisle install | Not Started | 10/05/26 | 10/30/26 | 25.0 | 25.0 |
|
17.5 |
RPL10.INT.SSBC.03580 |
RPL10.Ext.Build Back.SSB-Corr - LO #2 - Install Remaining GS MDF Mechanical (10.N2.05) | Build Back Exterior Leave Out Wall #2 (Tent Area) | Not Started | 10/05/26 | 10/13/26 | 8.8 | 8.8 |
|
26.2 |
RPL10.W3B.FE.012406 |
RPL10.Conn EF1F<>NS2.CFD3 (P2-3) Install Fiber Trunk (384F) [EF<>SSW] | EF1F<>NS2.4 (P2-3) [EF<>SSW] | Not Started | 10/05/26 | 10/06/26 | 2.5 | 2.5 |
|
28.8 |
RPL10.W3B.FE.013031 |
RPL10.Conn EF1F<>NS2.CFD3 (P2-3) Test Fiber Trunk (288F) [EF<>JXSW] | EF1F<>NS2.4 (P2-3) [EF<>JXSW] | Not Started | 10/05/26 | 10/06/26 | 2.5 | 2.5 |
|
33.8 |
RPL10.WP3A.EF2F.1150 |
RPL10.Conn EF2F(OPE)<>EF2B(MBOX) Pull/Install/Test OSP Cabling (for RPL08) - P3 | EF2F<>EF2B | Not Started | 10/05/26 | 10/12/26 | 7.5 | 7.5 |
|
153.8 |
RPL10.WP4.011940 |
RPL10.Conn NS2.CFD3 Pull/Install/Test Multidrop Cable (288F) [EF<>JXSW] | Pull/Install Trunk & Multidrop Cable | Not Started | 10/05/26 | 10/12/26 | 7.5 | 7.5 |
|
72.5 |
RPL10.WP4.018740 |
RPL10.Conn NS2.CFD4.48<>41-44 Install (A-End/Passive) Duplex Jumper (LC<>LC) [RSW<>FSW] | Install (A-End/Passive) Duplex Jumper [RSW<>FSW] | Not Started | 10/05/26 | 10/06/26 | 2.5 | 2.5 |
|
88.8 |
RPL10.WP4.030900 |
RPL10.Conn NS3.CFD1.48<>21-25 Prefab Duplex Jumper (LC<>LC) [RSW<>FSW] | Prefab | Not Started | 10/05/26 | 10/08/26 | 5.0 | 5.0 |
|
158.8 |
RPL10.WP4.06620 |
RPL10.Conn NS4.CFD1.48<>16-20 Pull Duplex Jumper (LC<>LC) [RSW<>FSW] | Pull Duplex Jumper [RSW<>FSW] | Not Started | 10/05/26 | 10/09/26 | 6.2 | 6.2 |
|
172.5 |
RPL10.WP4.06640 |
RPL10.Conn NS4.CFD1.48<>21-25 Pull Duplex Jumper (LC<>LC) [RSW<>FSW] | Pull Duplex Jumper [RSW<>FSW] | Not Started | 10/05/26 | 10/09/26 | 6.2 | 6.2 |
|
175.0 |
RPL10.WP4.NS2.03140 |
RPL10.Conn NS2.CFD2 Network Suite [JXSW<>MA] Multi Drop Cable | Pre ORv3 Rack | Not Started | 10/05/26 | 10/14/26 | 10.0 | 10.0 |
|
43.8 |
RPL10.CX.NS2.01150 |
RPL10.CX.NS2 - L3/L4 - Control Fault Domain 3 | NS2 Control Fault Domain 3 | Not Started | 10/06/26 | 10/27/26 | 20.0 | 20.0 |
|
17.5 |
RPL10.EY.EF2.01510 |
RPL10.EY.EF2 - Install RPL-3 FSP Interior Electrical Rough and Lighting | Fiber Support Platform - RPL-3 | Not Started | 10/06/26 | 10/15/26 | 10.0 | 10.0 |
|
167.5 |
RPL10.EY.NS2.01400 |
RPL10.EY.NS2 - Cure for Remaining Equipment Pads (High Early Mix) | Build Back Exterior Leave Out Wall #2 (Tent Area) | Not Started | 10/06/26 | 10/12/26 | 8.8 | 8.8 |
|
33.8 |
RPL10.EY.SSB.01330 |
RPL10.EY.SSB - Install Perm Paving | Hardscape and Landscape | Not Started | 10/06/26 | 10/19/26 | 12.5 | 12.5 |
|
72.5 |
RPL10.INT.NS4.02740 |
RPL10.Interior.NS4 - OFE - Control Fault Domain 5 SQ11.1 (HAC) | OFE NS4 Control Fault Domain 5 | Not Started | 10/06/26 | 10/19/26 | 12.5 | 12.5 |
|
66.2 |
RPL10.W3B.FE.011896 |
RPL10.Conn EF2B<>NS1.CFD2 (P1-4) Install Fiber Trunk (288F) [EF<>JXSW] | EF2B<>NS1.5 (P1-4) [EF<>JXSW] | Not Started | 10/06/26 | 10/08/26 | 3.8 | 3.8 |
|
18.8 |
RPL10.W3B.FE.013176 |
RPL10.Conn EF1F<>NS1.CFD3 (P2-3) Test Fiber Trunk (384F) [EF<>SSW] | EF1F<>NS1.4 (P2-3) [EF<>SSW] | Not Started | 10/06/26 | 10/07/26 | 2.5 | 2.5 |
|
23.8 |
RPL10.WP4.011580 |
RPL10.Conn NS1.CFD6 Pull/Install In-Row Trunk (24F) [EB<>DR] | [EB<>DR] | Not Started | 10/06/26 | 10/07/26 | 2.5 | 2.5 |
|
60.0 |
RPL10.WP4.016900 |
RPL10.Conn NS1.CFD4.48<>46-49 Install (A-End/Passive) Duplex Jumper (LC<>LC) [RSW<>FSW] | Install (A-End/Passive) Duplex Jumper [RSW<>FSW] | Not Started | 10/06/26 | 10/07/26 | 2.5 | 2.5 |
|
78.8 |
RPL10.WP4.029980 |
RPL10.Conn NS4.CFD2.48<>41-44 Prefab Duplex Jumper (LC<>LC) [RSW<>FSW] | Prefab | Not Started | 10/06/26 | 10/07/26 | 2.5 | 2.5 |
|
162.5 |
RPL10.WP4.030080 |
RPL10.Conn NS4.CFD3.48<>16-20 Prefab Duplex Jumper (LC<>LC) [RSW<>FSW] | Prefab | Not Started | 10/06/26 | 10/09/26 | 5.0 | 5.0 |
|
140.0 |
RPL10.WP4.031180 |
RPL10.Conn NS3.CFD2.48<>41-44 Prefab Duplex Jumper (LC<>LC) [RSW<>FSW] | Prefab | Not Started | 10/06/26 | 10/07/26 | 2.5 | 2.5 |
|
175.0 |
RPL10.WP4.031240 |
RPL10.Conn NS3.CFD3.48<>06-10 Prefab Duplex Jumper (LC<>LC) [RSW<>FSW] | Prefab | Not Started | 10/06/26 | 10/08/26 | 3.8 | 3.8 |
|
142.5 |
RPL10.WP4.032500 |
RPL10.Conn NS1.CFD2.33 Install (Z-End/Active) Duplex Jumper (LC<>LC) [MA<>JXSW] | Install Duplex Jumper [MA<>JXSW] | Not Started | 10/06/26 | 10/07/26 | 2.5 | 2.5 |
|
61.2 |