Schedule Viewer
Last schedule upload: D3-R25005-00-RPL10 — 8463 activities — 05/05/2026 09:13 AM CT
RPL10 - GC LIVE SCHEDULE - Data Date 20260426.xer
· Uploaded May 05, 2026 02:13 PM
· 8463 activities
Experimental
Auto-populate checklist dates from schedule:
100
Activities Shown
0
Completed
0
In Progress
5
Critical
| Activity ID | Activity Name | WBS | Status | Start | Finish | Dur (d) | Rem (d) | % Comp | Float (d) |
|---|---|---|---|---|---|---|---|---|---|
RPL10.WP4.016560 |
RPL10.Conn NS1.CFD4.17 Install (A-End/Passive) Duplex Jumper (LC<>LC) [MA<>JXSW] | Install (A-End/Passive) Duplex Jumper [MA<>JXSW] | Not Started | 09/10/26 | 09/11/26 | 2.5 | 2.5 |
|
83.8 |
RPL10.WP4.016720 |
RPL10.Conn NS1.CFD4.48<>03-05 Install (A-End/Passive) Duplex Jumper (LC<>LC) [RSW<>FSW] | Install (A-End/Passive) Duplex Jumper [RSW<>FSW] | Not Started | 09/10/26 | 09/11/26 | 2.5 | 2.5 |
|
78.8 |
RPL10.WP4.029880 |
RPL10.Conn NS4.CFD2.48<>16-20 Prefab Duplex Jumper (LC<>LC) [RSW<>FSW] | Prefab | Not Started | 09/10/26 | 09/15/26 | 5.0 | 5.0 |
|
162.5 |
RPL10.WP4.031080 |
RPL10.Conn NS3.CFD2.48<>16-20 Prefab Duplex Jumper (LC<>LC) [RSW<>FSW] | Prefab | Not Started | 09/10/26 | 09/15/26 | 5.0 | 5.0 |
|
175.0 |
RPL10.WP4.032720 |
RPL10.Conn NS2.CFD5.12 Install (Z-End/Active) Duplex Jumper (LC<>LC) [MA<>JXSW] | Install Duplex Jumper [MA<>JXSW] | Not Started | 09/10/26 | 09/11/26 | 2.5 | 2.5 |
|
102.5 |
RPL10.WP4.09680 |
RPL10.Conn NS1.CFD6.04<>04 Pull/Install Trunk (384F) [MA<>EB] | [MA<>EB] | Not Started | 09/10/26 | 09/11/26 | 2.5 | 2.5 |
|
52.5 |
RPL10.CX.EF2.01030 |
RPL10.CX.EF2 - L5 IST | EF2 | Not Started | 09/11/26 | 09/24/26 | 12.5 | 12.5 |
|
107.5 |
RPL10.CX.NS4.01050 |
RPL10.CX.NS4 - L3/L4 - House Power (for mechainical) | NS4 HOUSE POWER | Not Started | 09/11/26 | 09/24/26 | 12.5 | 12.5 |
|
80.0 |
RPL10.Conn.MS.01050 |
CorpNet & FacNet Available - NS1 | Network Suite 1 | Not Started | 09/11/26 | 09/11/26 | 0.0 | 0.0 |
|
128.8 |
RPL10.EY.NS1.01390 |
RPL10.EY.NS1 - Install Remaning EY Paving | Hardscape and Landscape | Not Started | 09/11/26 | 09/17/26 | 6.2 | 6.2 |
|
100.0 |
RPL10.EY.NS1.01410 |
RPL10.EY.NS1 - Install Remaining Electrical Panels (3) | Build Back Exterior Leave Out Wall #1 (Tent Area) | Not Started | 09/11/26 | 09/17/26 | 6.2 | 6.2 |
|
37.5 |
RPL10.INT.NS4.01240 |
RPL10.Interior.NS4 - Control Fault Domain 1 SQ7.1 - Install copper from GS.IDF to BMS and EPMS panels | Remaining Tie-ins post Mech Side Aisle install | Not Started | 09/11/26 | 10/08/26 | 25.0 | 25.0 |
|
55.0 |
RPL10.INT.NS4.01360 |
RPL10.Interior.NS4 - Control Fault Domain 2 SQ8.1 - Install Mechanical Side Aisle Cable Tray | Remaining Tie-ins post Mech Side Aisle install | Not Started | 09/11/26 | 10/08/26 | 25.0 | 25.0 |
|
46.2 |
RPL10.INT.NS4.02640 |
RPL10.Interior.NS4 - OFE - Control Fault Domain 3 SQ9.1 (Mech Side Aisle) | OFE NS4 Control Fault Domain 3 | Not Started | 09/11/26 | 09/22/26 | 10.0 | 10.0 |
|
48.8 |
RPL10.INT.SSBC.03560 |
RPL10.Ext.Build Back.SSB-Corr - LO #1 - Install Remaining GS MDF Mechanical (10.N1.03) | Build Back Exterior Leave Out Wall #1 (Tent Area) | Not Started | 09/11/26 | 09/21/26 | 8.8 | 8.8 |
|
46.2 |
RPL10.OFCI.7220 |
OFCI - Delivery ROJ: FE Fiber for CFD NS3.3 (ROJ ) (RVCD ) | NS3 | Not Started | 09/11/26 | 10/01/26 | 18.8 | 18.8 |
|
60.0 |
RPL10.W3B.FE.011331 |
RPL10.Conn EF2B<>NS2.CFD2 (P1-4) Pull Fiber Trunk (384F) [EF<>SSW] | EF2B<>NS2.5 (P1-4) [EF<>SSW] | Not Started | 09/11/26 | 09/14/26 | 2.5 | 2.5 |
|
51.2 |
RPL10.W3B.FE.012096 |
RPL10.Conn EF2B<>NS1.CFD3 (P1-4) Install Fiber Trunk (384F) [EF<>SSW] | EF2B<>NS1.4 (P1-4) [EF<>SSW] | Not Started | 09/11/26 | 09/14/26 | 2.5 | 2.5 |
|
18.8 |
RPL10.W3B.FE.012691 |
RPL10.Conn EF2B<>NS1.CFD3 (P1-4) Test Fiber Trunk (288F) [EF<>JXSW] | EF2B<>NS1.4 (P1-4) [EF<>JXSW] | Not Started | 09/11/26 | 09/14/26 | 2.5 | 2.5 |
|
27.5 |
RPL10.WP3A.EF1B.1030 |
RPL10.Conn EF1B(OPE)<>EF1F(MBOX) Pull/Install/Test OSP Cabling (for RPL07) - P3 | EF1B<>EF1F | Not Started | 09/11/26 | 09/18/26 | 7.5 | 7.5 |
|
173.8 |
RPL10.WP3A.EF1F.1145 |
RPL10.Conn EF1F(OPE)<>EF2B(MBOX) Pull/Install/Test OSP Cabling (for RPL06) - P2 | EB1F<>EF2B | Not Started | 09/11/26 | 09/24/26 | 12.5 | 12.5 |
|
151.2 |
RPL10.WP3A.EF2B.1005 |
RPL10.Conn EF2B(LIU)<>EF1F(MBOX) Pull/Install/Test OSP Cabling (for RPL05) - P2 | EF2B<>EF1F | Not Started | 09/11/26 | 09/24/26 | 12.5 | 12.5 |
|
151.2 |
RPL10.WP3A.EF2F.1050 |
RPL10.Conn EF2F(LIU)<>EF1B(MBOX) Pull/Install/Test OSP Cabling (for RPL03) - P3 | EF2F<>EF1B | Not Started | 09/11/26 | 09/24/26 | 12.5 | 12.5 |
|
113.8 |
RPL10.WP3A.EF2F.1105 |
RPL10.Conn EF2F(OPE)<>EF2F(MBOX) Pull/Install/Test OSP Cabling (for RPL08) - P2 | EF2F<>EF2F | Not Started | 09/11/26 | 09/16/26 | 5.0 | 5.0 |
|
173.8 |
RPL10.WP3B.FE.09160 |
RPL10.Conn EF2B<>NS2.CFD2 (P1-4) Pull/Install/Test - WBS Summary | EF2B<>NS2.5 (P1-4) [EF<>SSW] | Not Started | 09/11/26 | 10/15/26 | 31.2 | 31.2 |
|
32.5 |
RPL10.WP4.011900 |
RPL10.Conn NS2.CFD5 Pull/Install/Test Multidrop Cable (288F) [EF<>JXSW] | Pull/Install Trunk & Multidrop Cable | Not Started | 09/11/26 | 09/18/26 | 7.5 | 7.5 |
|
93.8 |
RPL10.WP4.018420 |
RPL10.Conn NS2.CFD4.17 Install (A-End/Passive) Duplex Jumper (LC<>LC) [MA<>JXSW] | Install (A-End/Passive) Duplex Jumper [MA<>JXSW] | Not Started | 09/11/26 | 09/14/26 | 2.5 | 2.5 |
|
93.8 |
RPL10.WP4.018580 |
RPL10.Conn NS2.CFD4.48<>03-05 Install (A-End/Passive) Duplex Jumper (LC<>LC) [RSW<>FSW] | Install (A-End/Passive) Duplex Jumper [RSW<>FSW] | Not Started | 09/11/26 | 09/14/26 | 2.5 | 2.5 |
|
88.8 |
RPL10.WP4.032280 |
RPL10.Conn NS1.CFD4.22 Install (Z-End/Active) Duplex Jumper (LC<>LC) [MA<>JXSW] | Install Duplex Jumper [MA<>JXSW] | Not Started | 09/11/26 | 09/14/26 | 2.5 | 2.5 |
|
95.0 |
RPL10.WP4.032360 |
RPL10.Conn NS1.CFD3.26 Install (Z-End/Active) Duplex Jumper (LC<>LC) [MA<>JXSW] | Install Duplex Jumper [MA<>JXSW] | Not Started | 09/11/26 | 09/14/26 | 2.5 | 2.5 |
|
85.0 |
RPL10.WP4.03940 |
RPL10.Conn NS2.CFD3.32 Pull Duplex Jumper (LC<>LC) [MA<>JXSW] | Pull Duplex Jumper [MA<>JXSW] | Not Started | 09/11/26 | 09/15/26 | 3.8 | 3.8 |
|
102.5 |
RPL10.WP4.04300 |
RPL10.Conn NS2.CFD2.40 Pull Duplex Jumper (LC<>LC) [MA<>JXSW] | Pull Duplex Jumper [MA<>JXSW] | Not Started | 09/11/26 | 09/15/26 | 3.8 | 3.8 |
|
102.5 |
RPL10.INT.SSBC.01530 |
RPL10.Int.Build Back.SSB-Corr - LO #1 - Remaining NS1 L2 Checklist Completion | Build Back Interior Leave Out Wall #1 (NS1) | Not Started | 09/14/26 | 09/18/26 | 6.2 | 6.2 |
|
76.2 |
RPL10.W3B.FE.011306 |
RPL10.Conn EF2B<>NS1.CFD1 (P1-4) Pull Fiber Trunk (384F) [EF<>SSW] | EF2B<>NS1.6 (P1-4) [EF<>SSW] | Not Started | 09/14/26 | 09/15/26 | 2.5 | 2.5 |
|
61.2 |
RPL10.W3B.FE.012126 |
RPL10.Conn EF2B<>NS2.CFD3 (P1-4) Install Fiber Trunk (384F) [EF<>SSW] | EF2B<>NS2.4 (P1-4) [EF<>SSW] | Not Started | 09/14/26 | 09/15/26 | 2.5 | 2.5 |
|
28.8 |
RPL10.W3B.FE.012711 |
RPL10.Conn EF2B<>NS2.CFD3 (P1-4) Test Fiber Trunk (288F) [EF<>JXSW] | EF2B<>NS2.4 (P1-4) [EF<>JXSW] | Not Started | 09/14/26 | 09/15/26 | 2.5 | 2.5 |
|
37.5 |
RPL10.WP3B.FE.08980 |
RPL10.Conn EF2B<>NS1.CFD1 (P1-4) Pull/Install/Test - WBS Summary | EF2B<>NS1.6 (P1-4) [EF<>SSW] | Not Started | 09/14/26 | 11/06/26 | 50.0 | 50.0 |
|
18.8 |
RPL10.WP4.010020 |
RPL10.Conn NS2.CFD4 Pull/Install Trunk (384F) [RSW<>FSW] | Pull/Install Trunk & Multidrop Cable | Not Started | 09/14/26 | 09/22/26 | 8.8 | 8.8 |
|
83.8 |
RPL10.WP4.016580 |
RPL10.Conn NS1.CFD4.18 Install (A-End/Passive) Duplex Jumper (LC<>LC) [MA<>JXSW] | Install (A-End/Passive) Duplex Jumper [MA<>JXSW] | Not Started | 09/14/26 | 09/15/26 | 2.5 | 2.5 |
|
83.8 |
RPL10.WP4.016740 |
RPL10.Conn NS1.CFD4.48<>06-10 Install (A-End/Passive) Duplex Jumper (LC<>LC) [RSW<>FSW] | Install (A-End/Passive) Duplex Jumper [RSW<>FSW] | Not Started | 09/14/26 | 09/15/26 | 2.5 | 2.5 |
|
78.8 |
RPL10.WP4.029540 |
RPL10.Conn NS2.CFD1.48<>31-35 Prefab Duplex Jumper (LC<>LC) [RSW<>FSW] | Prefab | Not Started | 09/14/26 | 09/16/26 | 3.8 | 3.8 |
|
73.8 |
RPL10.WP4.032740 |
RPL10.Conn NS2.CFD5.13 Install (Z-End/Active) Duplex Jumper (LC<>LC) [MA<>JXSW] | Install Duplex Jumper [MA<>JXSW] | Not Started | 09/14/26 | 09/15/26 | 2.5 | 2.5 |
|
102.5 |
RPL10.WP4.032820 |
RPL10.Conn NS2.CFD4.17 Install (Z-End/Active) Duplex Jumper (LC<>LC) [MA<>JXSW] | Install Duplex Jumper [MA<>JXSW] | Not Started | 09/14/26 | 09/15/26 | 2.5 | 2.5 |
|
92.5 |
RPL10.WP4.09220 |
RPL10.Conn NS2.CFD4 Pull/Install Trunk (192F) [FSW<>SSW] | Pull/Install Trunk & Multidrop Cable | Not Started | 09/14/26 | 09/21/26 | 7.5 | 7.5 |
|
105.0 |
RPL10.WP4.09700 |
RPL10.Conn NS1.CFD6.45<>03 Pull/Install Trunk (384F) [MA<>EB] | [MA<>EB] | Not Started | 09/14/26 | 09/17/26 | 5.0 | 5.0 |
|
52.5 |
RPL10.WP4.NS2.02500 |
RPL10.Conn NS2.CFD5 GSMDF <> Network Suites Management Trunks | Post ORv3 Rack | Not Started | 09/14/26 | 09/23/26 | 10.0 | 10.0 |
|
27.5 |
RPL10.WP4.NS2.02660 |
RPL10.Conn NS2.CFD4 Network Suite [JXSW<>MA] Fanouts | Post ORv3 Rack | Not Started | 09/14/26 | 09/23/26 | 10.0 | 10.0 |
|
32.5 |
GCD.RPL10.3885 |
L3/L4 Start - NS1 Rows 41-48 | NS | Not Started | 09/15/26 | 09/15/26 | 0.0 | 0.0 |
|
83.8 |
GCD.RPL10.3965 |
L3/L4 Finish mCUP [5-8] - RPL10 | mCup | Not Started | 09/15/26 | 09/15/26 | 0.0 | 0.0 |
|
385.0 |
GCD.RPL10.4825 |
L3/L4 Start - NS2 Rows 1-8 | NS | Not Started | 09/15/26 | 09/15/26 | 0.0 | 0.0 |
|
117.5 |
GCD.RPL10.5705 |
Area Completion - mCup | mCup | Not Started | 09/15/26 | 09/15/26 | 0.0 | 0.0 |
|
385.0 |
RPL10.CX.NS1.01170 |
RPL10.CX.NS1 - L3/L4 - Elec. Domain 02/01 | NS1 ELECTRICAL | Not Started | 09/15/26 | 09/18/26 | 5.0 | 5.0 |
|
12.5 |
RPL10.CX.NS1.01520 |
RPL10.CX.NS1 - L3/L4 - Control Fault Domain 2 - TW Flush and Fill | NS1 Control Fault Domain 2 | Not Started | 09/15/26 | 09/24/26 | 10.0 | 10.0 |
|
7.5 |
RPL10.W3B.FE.011516 |
RPL10.Conn EF2F<>NS2.CFD2 (P1-4) Pull Fiber Trunk (288F) [EF<>JXSW] | EF2F<>NS2.5 (P1-4) [EF<>JXSW] | Not Started | 09/15/26 | 09/17/26 | 3.8 | 3.8 |
|
51.2 |
RPL10.W3B.FE.012291 |
RPL10.Conn EF2F<>NS1.CFD3 (P1-4) Install Fiber Trunk (288F) [EF<>JXSW] | EF2F<>NS1.4 (P1-4) [EF<>JXSW] | Not Started | 09/15/26 | 09/17/26 | 3.8 | 3.8 |
|
18.8 |
RPL10.W3B.FE.012896 |
RPL10.Conn EF2B<>NS1.CFD3 (P1-4) Test Fiber Trunk (384F) [EF<>SSW] | EF2B<>NS1.4 (P1-4) [EF<>SSW] | Not Started | 09/15/26 | 09/16/26 | 2.5 | 2.5 |
|
27.5 |
RPL10.WP3A.EF2B.1090 |
RPL10.Conn EF2B(LIU)<>EF1F(MBOX) Pull/Install/Test OSP Cabling (for RPL05) - P3 | EF2B<>EF2F | Not Started | 09/15/26 | 09/22/26 | 7.5 | 7.5 |
|
141.2 |
RPL10.WP3A.EF2B.1135 |
RPL10.Conn EF2B(LIU)<>EF2B(MBOX) Pull/Install/Test OSP Cabling (for RPL05) - P4 | EF2B<>EF2B | Not Started | 09/15/26 | 09/18/26 | 5.0 | 5.0 |
|
161.2 |
RPL10.WP3B.FE.09040 |
RPL10.Conn EF2F<>NS2.CFD2 (P1-4) Pull/Install/Test - WBS Summary* | EF2F<>NS2.5 (P1-4) [EF<>JXSW] | Not Started | 09/15/26 | 10/20/26 | 32.5 | 32.5 |
|
31.2 |
RPL10.WP4.018440 |
RPL10.Conn NS2.CFD4.18 Install (A-End/Passive) Duplex Jumper (LC<>LC) [MA<>JXSW] | Install (A-End/Passive) Duplex Jumper [MA<>JXSW] | Not Started | 09/15/26 | 09/16/26 | 2.5 | 2.5 |
|
93.8 |
RPL10.WP4.018600 |
RPL10.Conn NS2.CFD4.48<>06-10 Install (A-End/Passive) Duplex Jumper (LC<>LC) [RSW<>FSW] | Install (A-End/Passive) Duplex Jumper [RSW<>FSW] | Not Started | 09/15/26 | 09/16/26 | 2.5 | 2.5 |
|
88.8 |
RPL10.WP4.029720 |
RPL10.Conn NS4.CFD1.48<>26-30 Prefab Duplex Jumper (LC<>LC) [RSW<>FSW] | Prefab | Not Started | 09/15/26 | 09/18/26 | 5.0 | 5.0 |
|
168.8 |
RPL10.WP4.030820 |
RPL10.Conn NS3.CFD1.48<>03-05 Prefab Duplex Jumper (LC<>LC) [RSW<>FSW] | Prefab | Not Started | 09/15/26 | 09/16/26 | 2.5 | 2.5 |
|
158.8 |
RPL10.WP4.032300 |
RPL10.Conn NS1.CFD4.23 Install (Z-End/Active) Duplex Jumper (LC<>LC) [MA<>JXSW] | Install Duplex Jumper [MA<>JXSW] | Not Started | 09/15/26 | 09/16/26 | 2.5 | 2.5 |
|
95.0 |
RPL10.WP4.032380 |
RPL10.Conn NS1.CFD3.27 Install (Z-End/Active) Duplex Jumper (LC<>LC) [MA<>JXSW] | Install Duplex Jumper [MA<>JXSW] | Not Started | 09/15/26 | 09/16/26 | 2.5 | 2.5 |
|
85.0 |
RPL10.WP4.NS2.03020 |
RPL10.Conn NS2.CFD3 - Install ORv3 | OFE - Passive In-row Racks, Racks (ORv3Ns, MCRs) & PON | Not Started | 09/15/26 | 09/23/26 | 8.8 | 8.8 |
|
3.8 |
RPL10.WP4.NS2.03040 |
RPL10.Conn NS2.CFD3 - Deliver & Assemble - PON | OFE - Passive In-row Racks, Racks (ORv3Ns, MCRs) & PON | Not Started | 09/15/26 | 09/23/26 | 8.8 | 8.8 |
|
67.5 |
RPL10.WP4.NS3.01060 |
RPL10.Conn NS3.CFD1 Network - WBS Summary | Network | Not Started | 09/15/26 | 01/05/27 | 95.0 | 95.0 |
|
131.2 |
RPL10.CX.MCUP.01110 |
RPL10.CX.mCup Loop 2 - L3/L4 - mCUP - System Testing | mCup Loop 2 (mCup #2,#4,#6,#8) | Not Started | 09/16/26 | 09/29/26 | 12.5 | 12.5 |
|
372.5 |
RPL10.EY.NS2.01370 |
RPL10.EY.NS2 - Demo of Tent SOG | Tent and Temp Conditions | Not Started | 09/16/26 | 09/22/26 | 6.2 | 6.2 |
|
20.0 |
RPL10.INT.NS3.01140 |
RPL10.Interior.NS3 - Control Fault Domain 1 SQ7.2 - Install Vesda / FA | Remaining Tie-ins post Mech Side Aisle install | Not Started | 09/16/26 | 10/13/26 | 25.0 | 25.0 |
|
57.5 |
RPL10.INT.NS3.01150 |
RPL10.Interior.NS3 - Control Fault Domain 1 SQ7.2 - Install FW | Remaining Tie-ins post Mech Side Aisle install | Not Started | 09/16/26 | 10/13/26 | 25.0 | 25.0 |
|
0.0 |
RPL10.INT.NS3.01990 |
RPL10.Interior.NS3 - Control Fault Domain 1 SQ7.2 - Install TW | Remaining Tie-ins post Mech Side Aisle install | Not Started | 09/16/26 | 10/13/26 | 25.0 | 25.0 |
|
0.0 |
RPL10.INT.NS3.02540 |
RPL10.Interior.NS3 - OFE - Control Fault Domain 1 SQ7.2 (Mech Side Aisle) | OFE NS3 Control Fault Domain 1 | Not Started | 09/16/26 | 09/16/26 | 1.2 | 1.2 |
|
0.0 |
RPL10.INT.NS3.02580 |
RPL10.Interior.NS3 - OFE - Control Fault Domain 2 SQ8.2 (HAC) | OFE NS3 Control Fault Domain 2 | Not Started | 09/16/26 | 09/29/26 | 12.5 | 12.5 |
|
3.8 |
RPL10.INT.NS3.02860 |
RPL10.Interior.NS3 - Control Fault Domain 1 SQ7.2 - Install Duct (MES Side) | Remaining Tie-ins post Mech Side Aisle install | Not Started | 09/16/26 | 10/13/26 | 25.0 | 25.0 |
|
0.0 |
RPL10.ORV3.010120 |
OFE - Delivery ROJ: ORv3 for CFD NS1.1 (ROJ 10.15.26) (RVCD 08.03.26) | NS1 | Not Started | 09/16/26 | 10/06/26 | 18.8 | 18.8 |
|
7.5 |
RPL10.W3B.FE.011606 |
RPL10.Conn EF1F<>NS2.CFD3 (P2-3) Pull Fiber Trunk (384F) [EF<>SSW] | EF1F<>NS2.4 (P2-3) [EF<>SSW] | Not Started | 09/16/26 | 09/18/26 | 3.8 | 3.8 |
|
41.2 |
RPL10.W3B.FE.011706 |
RPL10.Conn EF2F<>NS1.CFD1 (P1-4) Pull Fiber Trunk (384F) [EF<>SSW] | EF2F<>NS1.6 (P1-4) [EF<>SSW] | Not Started | 09/16/26 | 09/17/26 | 2.5 | 2.5 |
|
61.2 |
RPL10.W3B.FE.012311 |
RPL10.Conn EF2F<>NS2.CFD3 (P1-4) Install Fiber Trunk (288F) [EF<>JXSW] | EF2F<>NS2.4 (P1-4) [EF<>JXSW] | Not Started | 09/16/26 | 09/18/26 | 3.8 | 3.8 |
|
28.8 |
RPL10.W3B.FE.012926 |
RPL10.Conn EF2B<>NS2.CFD3 (P1-4) Test Fiber Trunk (384F) [EF<>SSW] | EF2B<>NS2.4 (P1-4) [EF<>SSW] | Not Started | 09/16/26 | 09/17/26 | 2.5 | 2.5 |
|
37.5 |
RPL10.WP3B.FE.08140 |
RPL10.Conn EF1F<>NS2.CFD3 (P2-3) Pull/Install/Test - WBS Summary* | EF1F<>NS2.4 (P2-3) [EF<>SSW] | Not Started | 09/16/26 | 10/08/26 | 21.2 | 21.2 |
|
33.8 |
RPL10.WP3B.FE.08940 |
RPL10.Conn EF2F<>NS1.CFD1 (P1-4) Pull/Install/Test - WBS Summary | EF2F<>NS1.6 (P1-4) [EF<>SSW] | Not Started | 09/16/26 | 11/10/26 | 50.0 | 50.0 |
|
18.8 |
RPL10.WP4.016600 |
RPL10.Conn NS1.CFD4.19 Install (A-End/Passive) Duplex Jumper (LC<>LC) [MA<>JXSW] | Install (A-End/Passive) Duplex Jumper [MA<>JXSW] | Not Started | 09/16/26 | 09/17/26 | 2.5 | 2.5 |
|
83.8 |
RPL10.WP4.016760 |
RPL10.Conn NS1.CFD4.48<>11-15 Install (A-End/Passive) Duplex Jumper (LC<>LC) [RSW<>FSW] | Install (A-End/Passive) Duplex Jumper [RSW<>FSW] | Not Started | 09/16/26 | 09/17/26 | 2.5 | 2.5 |
|
78.8 |
RPL10.WP4.029900 |
RPL10.Conn NS4.CFD2.48<>21-25 Prefab Duplex Jumper (LC<>LC) [RSW<>FSW] | Prefab | Not Started | 09/16/26 | 09/21/26 | 5.0 | 5.0 |
|
162.5 |
RPL10.WP4.031100 |
RPL10.Conn NS3.CFD2.48<>21-25 Prefab Duplex Jumper (LC<>LC) [RSW<>FSW] | Prefab | Not Started | 09/16/26 | 09/21/26 | 5.0 | 5.0 |
|
175.0 |
RPL10.WP4.032760 |
RPL10.Conn NS2.CFD5.14 Install (Z-End/Active) Duplex Jumper (LC<>LC) [MA<>JXSW] | Install Duplex Jumper [MA<>JXSW] | Not Started | 09/16/26 | 09/17/26 | 2.5 | 2.5 |
|
102.5 |
RPL10.WP4.032840 |
RPL10.Conn NS2.CFD4.18 Install (Z-End/Active) Duplex Jumper (LC<>LC) [MA<>JXSW] | Install Duplex Jumper [MA<>JXSW] | Not Started | 09/16/26 | 09/17/26 | 2.5 | 2.5 |
|
92.5 |
RPL10.WP4.09040 |
RPL10.Conn NS1.CFD4 Pull/Install/Test Trunk (192F) [MA<>JXSW] | Pull/Install Trunk & Multidrop Cable | Not Started | 09/16/26 | 09/29/26 | 12.5 | 12.5 |
|
86.2 |
RPL10.WP4.NS1.03640 |
RPL10.Conn NS1.CFD1 Network - WBS Summary | Network | Not Started | 09/16/26 | 12/04/26 | 68.8 | 68.8 |
|
30.0 |
RPL10.WP4.NS1.03680 |
RPL10.Conn NS1.CFD1 Network Suite [JXSW<>MA] Trunks | Pre ORv3 Rack | Not Started | 09/16/26 | 09/18/26 | 3.8 | 3.8 |
|
76.2 |
RPL10.CX.NS2.01130 |
RPL10.CX.NS2 - L3/L4 - Control Fault Domain 4 | NS2 Control Fault Domain 4 | Not Started | 09/17/26 | 10/08/26 | 20.0 | 20.0 |
|
17.5 |
RPL10.EY.NS1.01460 |
RPL10.EY.NS1 - Install Remaining Mechanical Tie-ins | Build Back Exterior Leave Out Wall #1 (Tent Area) | Not Started | 09/17/26 | 09/30/26 | 12.5 | 12.5 |
|
36.2 |
RPL10.SSBC.BB.3045 |
RPL10.Ext.Build Back.SSB-Corr - Exterior Leave Out # 2 (Tent Area) WBS Summary | Build Back Exterior Leave Out Wall #2 (Tent Area) | Not Started | 09/17/26 | 12/02/26 | 65.0 | 65.0 |
|
26.2 |
RPL10.SSBC.BB.3050 |
RPL10.Ext.Build Back.SSB-Corr - LO #2 - Install Remaining Foor Supported Supplemental Steel (See Notes) | Build Back Exterior Leave Out Wall #2 (Tent Area) | Not Started | 09/17/26 | 09/23/26 | 6.2 | 6.2 |
|
26.2 |
RPL10.SSBC.BB.3065 |
RPL10.Ext.Build Back.SSB-Corr - LO #2 - F/R/P Stem wall | Build Back Exterior Leave Out Wall #2 (Tent Area) | Not Started | 09/17/26 | 09/21/26 | 3.8 | 3.8 |
|
35.0 |
RPL10.WP2.GSIDF.1070 |
RPL10.Conn IDF Huts - (GSMDF to GSIDF) NS2 N21 WBS Summary | GSIDFN21 | Not Started | 09/17/26 | 10/16/26 | 27.5 | 27.5 |
|
356.2 |
RPL10.WP2.GSIDF.1080 |
RPL10.Conn GSIDFN21 Install Infrastructure (Racks, Waterfalls etc.) | Infrastructure | Not Started | 09/17/26 | 09/23/26 | 6.2 | 6.2 |
|
-18.8 |
RPL10.WP3A.EF1B.1100 |
RPL10.Conn EF1B(OPE)<>EF2F(MBOX) Pull/Install/Test OSP Cabling (for RPL07) - P1 | EF1B<>EF2F | Not Started | 09/17/26 | 09/30/26 | 12.5 | 12.5 |
|
133.8 |